Dear AllI got this error today. I was working with mcc normally until today. I tried to work on the slave core of dspic33CH128MP508. When I start the mcc on slave core "which is empty" it works normally. However, when I start it on the master core it gave..
↧
MCC error: "SEVERE: Invalid configuration file" (ashraf.m.alraheem@gmail.com)
↧
SAME70-XPLD support? (Volker)
Hi, i get a SAME70-XPLD Board and want to test some Harmony 3 projects.Unfortunately MPLAB-X can't connect to the EDBG from the XPLD Board. If i read the release notes correct, MPLAB-X should support the EDBG form the XPLD Boards.I get the messages: The p..
↧
↧
How to create and use file templates in MPLAB X? (dengp1)
I am trying to figure out how to use file templates.
These are the templates that populate a file when you create a new (say can.h) file.
There is a default that generates this for example:
/* * File: can.h * Author: name * * Created on July 12, 2012..
↧
MPLAB-X still sucks (tunelabguy)
I would happily continue using MPLAB 8.92, except that it does not support the latest programmers and the newest devices, so I am giving it another try. It is a little more stable than it was when I tried it more than a year ago. But much less useful than..
↧
How to actually program/debug a SAM device with MPLAB-X? (buoyriz)
Given that MPLAB-X IDE is now supposed to support some of the 32-bit SAM devices from the former Atmel, I thought I'd give it a try - I'm no fan of Atmel Studio, and the idea of being able to have supported tools available on Mac and Linux is of great int..
↧
↧
Not able to view my code in MPLAB X IDE..! (Mr.MD)
I am trying to open my project (.C file) in MPLAB X ide (v5.15), but i cannot see my code, instead it opens up a rather weird window. It shows some history tab (of which i have no idea). I have attached a Screenshot. Could someone help me figure this out?..
↧
How do I set the start folder that starts every time I add existing object to project? (user2x)
Hello, Every time I want to add an existing file to my new project (Right click - add existing), it starts in the .X folder somewher and I have to click a number of time out of there and into the .src folder I have. How do I set the folder to not start in..
↧
Alternative to MPLAB X (itdontgo)
I'm sorry to say this but I cannot migrate from MPLAB 5, 6, 7, or 8 to this new version. It's far too difficult to use when you're doing complicated 8-bit projects.Is there any alternative to MPLAB X. Is there absolutely any way I can use a new part in MP..
↧
MPLAB X 5.15 Issue with JLink EDU Mini (pnewman)
I am trying to use the Segger JLink EDU Mini with MPLAB X 5.15 and an ATSAMS70Q21 board. When I try to run a simple program it gives the following error: Unable to load SEGGER J-Link Probe
Unable to acquire the ControlPointMediator
Connecting to JLink..
↧
↧
How do I change the value in "watches" MPLABX ? (sergioigel)
Hi, How do I change the value in "watches" MPLABX ? using simulator... thanks,..
↧
MPLABX PICKIT3 struggles - no debug - RESOLVED (kaster14)
I post this as an FYI to anyone else who runs across this or similar problems:
I use MPLAB8.92 mostly (I find it faster, more reliable, and more bug free than MPLABX...) but had to use MPLABX when working on a PIC16F18313 project (MPLAB8 does not suppo..
↧
Acronyms question (Lucky Luka)
Hi allI was looking for compatibility of pickit 4 using mplab x.Can someone help me to understand the meaning of D and P at the end of the acronyms?Cheers..
↧
How can i assign a datasheet to my project? (JPortici)
Sorry for the somewhat confusing title..some time ago a "PDF" button was added in the editor, next to the source/history buttons. I didn't notice it before because it was always grayed out, however in the harmony 3 examples this button is active and it wi..
↧
↧
Linking slave and master core files Errors (ashraf.m.alraheem@gmail.com)
Hi,I am using MPLABX v5.15 and try to build a dual core code for dsPIC33CH128MP508.When I was using the master core. I was working normally.When I tried to add the slave core I got the following error:nbproject/Makefile-default.mk:239: recipe for target '..
↧
Harmony Configurator Help - Font size (l.ubaldi)
Hi, i've a stupid problem, in the "help" of harmony configurator i have a small size font, i cant read all the words...
How can i do to change the size of the font only of this section?..
↧
MPLAB X IDE Update instructions (toroac)
Hi all
I am a new user running MPLAB X IDE V1.30 (Mac OSX version) and wish to update to new 1.41 version, but can't find anywhere how to update. I suppose it's my fault but have been several days looking for update instructions or menu option to do so a..
↧
nEDBG Debugging Fails, PIC16F18446 Model Rocket Data Logger (rasyoung)
Howdy!, Experimenting with MplabX 5.15 today, and the Curiosity Nano, PIC16F18446... Working with several applications downloaded from Microchip Mplab Xpress Cloud, spec. the "Model Rocket Data Logger app" etc. ... all are failing exactly the same on debu..
↧
↧
Can't simulated ADC (Simlock)
Hello,I try to simulate an ADC while waiting to have the card in hand but I can't configure the voltage on a pin and get a result...For information, I use:
- MPLAB 5.10
- XC8 2.05
- PIC18F65K40 ADC Init function :static void HARD_InitADC (void)
{<..
{<..
↧
MPLAB X v5.15 install hangs - kludge solution (Howard Long)
I have a locked down Windows 10 1703 build 15063.1659 x64 machine at a customer on which I could install v5.10 but v5.15 hangs during the install extracting the include files about 20% of the way through. It doesn't always stop at the the same place, but ..
↧
Impossible to write something in the microcontroller (Noismart)
Hi everybody, First of all I would like to say that I´m new with this tool, so sorry if the question is very basic. The problem I have is with a piece of code that was designed a few years ago, apparently with other mplab versions and xcode versions. The ..
↧